+86-13808405352
Explore Shop

MPS VMII inverter how to connect with PV or batteries?

Battery Connection:

Caution: For safety operation and regulation compliance, it’s requested to install a separate DC over-current protector or disconnect device between battery and inverter. It may not be requested to have a disconnect device in some applications, however, it’s still requested to have over-current protection installed.Please refer to typical amperage in below table as required fuse or beaker size.

WARNING!All wiring must be perfomred by a qualifed personnel.

WARNING! It’s very important for system safety and efficient operation to use appropriate cable for battery connection. To reduce risk of jujury, pls use the proper recommended cable as below.

5. Insert the battery wires flatly into battery connectors of inverter and make sure the bolts are tightened with torque of 2 NM in clockwise direction. Make sure polarity at both the battery and the inverter / charge is correctly connected and conductors are tightly screwed into the battery terminals.

PV connect:

Caution: Before connecting to PV modules, please install separately a DC circuit breaker between inverter and PV modeles.

Warning! It’s very important for system safety and efficient operation to use appropriate cable for PV module connection. To reduce risk of injury, please use the proper recommended cable size as below:

1